Warranty & Care

Martin Pierce Hardware is a designer and manufacturer of door and cabinet hardware. We are a small studio of artisans producing original pieces designed by Martin Pierce and made to order. All sales are final, we do not offer an open return policy so please contact us for any help or to answer questions before you place your order. We pride ourselves on the quality of our work and stand behind our products with a lifetime warranty against defects in casting. Finishes are not covered by this warranty, please refer to product care instructions below for best cleaning practices. Similarly,any damage that occurs through poor installation or care for the product will not be considered a defect.

Internal mechanisms including locks, latches, fasteners supplied by Martin Pierce Hardware but manufactured by others are guaranteed for one year from the date of purchase. We will not assume liability for any labor charges incurred during the removal, or re-installation of the mechanisms or trim or cover any freight,postage or handling expense. Please refer to our return policy if you believe the product to be defective.

Product Finish & Care

Our cabinet pulls and door hardware are created using the lost wax method of casting and are available in either silicon bronze or 316 stainless steel. Bronze and stainless steel are both highly durable alloys and are rust resistant. Our castings are made with 85% recycled metal and are made in the USA in Los Angeles. No 2 castings are identical and subtle variations may occur.

Bronze

Our Bronze cabinet pulls can be ordered in a light antique or dark antique oil rubbed finish. These finishes are created using an oxidizing material that is applied by hand and sealed with a water-based sealer or hard wax. As each piece is hand finished no 2 pieces will be identical and subtle variations may occur between pieces. The look of bronze will change over time with each piece developing its unique patina. Cleaning all surfaces with a mild soapy water and a non-abrasive cloth will help the piece age gradually. Do not use cleaning agents that contain abrasive elements or caustic chemicals as these may discolor or corrode the piece. Make sure to dry the surface after cleaning with a soft cloth.

Stainless Steel

Our 316 stainless steel castings have a brushed finish except for our Ergo collection which can either be uniformly brushed or finished as a two-tone texture with some areas polished and some areas brushed to accentuate this fluid design.

The surface of the piece can be cleaned with a lint free or microfiber cloth and a small amount of non-abrasive stainless steel cleaner. The cleaner should be applied in the same direction as the grain of the brushed surface. For polished surfaces the cleaner should be applied in a circular non directional pattern.

Nickel Plating

Our orchid cabinet pulls are available in brushed nickel which is applied as a thin film over the bronze casting by electro-plating.

The nickel surface will tarnish and needs to be cleaned regularly with a lightly soaped soft cloth. Following cleaning the surface should be thoroughly dried and it can be sealed with a furniture wax which will help to reduce tarnishing. Do not use harsh or abrasive chemicals to clean the surface. If regularly cleaned the nickel plating will last a long time provided it is not exposed to salt water or air acidity or other damaging pollutants.

Return Policy

We do not offer an open return policy, each sale being final unless a piece is defective, so please contact us if you have any questions about a piece before you place your order. Each piece is made and finished by hand and we hope will become a valued treasure. In the event that a product is defective please contact us so that we may issue a return authorization. Subtle variations in the finish of products will not be considered a defect. The evolving color of a patina that changes over time is also not considered a defect. Similarly, any damage that occurs through poor installation or care for the product will not be considered a defect. On receiving the returned piece and if it is defective, we will replace the product promptly or issue a refund if requested. We will not assume liability for any labor charges incurred incurred during the removal, or re-installation of the mechanisms or trim or cover any freight,postage or handling expense.