Hardware, bugs and more at Martin Pierce Hardware

Throughout the years we have shared with you Martin's interest, actually fascination, with insects.  So much so that for several months last year we hosted two beetles we fondly named Natasha and Boris. This interest not only includes the study of their habits but extends further to the study of their habitats, behavior and skeletal structure.  Therefore, many of our vacations and weekend excursions are planned for the very purpose of scouting for and studying many of these creatures. All of this research and study enables Martin to apply amazing detail to not only custom hardware pieces but also to the bronze sculptures and paintings he has been working on. While photographs and more information on these pieces will be available soon, rest assured that the wait will be worth it.

Here are a few examples of some of the custom hardware pieces, in actuality miniature sculptures, that we offer in our collections.  The same labor intensive casting process is used in our smaller hardware pieces as is used in our larger sculptures and custom projects.  Please make note of the exquisite detail in each and every piece.

Wasps feature prominently in some of Martin's new work.  However, our Animal collection of architectural hardware includes a bronze wasp drawer pull that is available in both an open wing and closed wing design.  The beautiful detailing on the wings adds dimension and texture and would be a wonderful addition to the decorative design of a retail boutique, spa or residential project.

Many items from our various collections, including the wasp pull, are artfully displayed at Folger & Burt's showroom in San Francisco.

To view our entire collection of custom hardware or to discuss your own hospitality design project, please visit our site at www.martinpierce.com.

Our final homage to Antoni Gaudi's architecture

As we continue to share highlights of our recent vacation to Spain we saved the best for last.  Although, quite honestly,  each of Gaudi’s works stands on its own; each is a harmonious tribute to nature. Sagrada Familia

I think the reason that La Sagrada Familia has become the focal point of Gaudi’s achievements is, in part, due to its continued evolution.  Gaudi began work on it in 1883 and continued to work until his death in 1926 when it was less than a quarter complete. Work has continued over the decades, funded by private donations.  The basilica is scheduled to be completed by 2026 which will be the centennial of Gaudi’s death.  On a side note, it is deemed a basilica, meaning significant church, as Barcelona already has a cathedral and apparently you can only have one per city!

Look closely at the exterior of the Sagrada Familia and you will find that it consists of layer upon layer of images and symbolism.

Once inside the visual delight continues.  Pillars inspired by sinew and bones are an amazing feat of both engineering and aesthetic design.

It is fun to compare the design of the pillars to the sinewy movement and design of our Epic entry door handles from our Ergo Collection of architectural hardware.

And light and color are never forgotten by the maestro!

The location and grand scale of this iconic building has certainly secured its position in history and is worth a visit since photographs do not do it justice.

You can view our entire collection of custom hardware at www.martinpierce.com.

Ada compliant contemporary hardware designs

Many of today's designers and architects are seeking door and cabinet hardware for hotels, spas, nightclubs and commercial buildings that are not only attractive but that also comply with strict ADA building codes.  In other words, hardware that is easy to grasp and operate for those who may have some physical limitations. This might be necessary in brand new construction or in a retrofit situation.  This is difficult enough without adding the additional requirement of good looks.

As the population continues to age and, in this very competitive market, it is important that buildings be designed to allow easy access to all who wish to enter.  After all, a businessman does not want to deter someone who might have difficulty gaining entrance and/or navigating the building from entering and conducting their business.  More importantly, consumers need to be able to gain access to their home, their doctor's offices or retail shops.

We are pleased that our Ergo collection of custom hardware meets these demanding standards.  The lever design of our entry and passageway pieces are easy to operate and create a stunning look that will please any lover of contemporary design. Several of our collections, including Morphic, can, upon request, also be adapted to meet ADA standards. This might include lever style handles in place of knobs and pulls that do not require a strong grasp in order to easily operate them.

If you are in the market for door hardware with a crisp and contemporary look and that is ADA compliant or would like to view our entire collection of custom hardware, please visit our site at www.martinpierce.com.

Add color to your custom hardware

 

Most of us are familiar with and expect oil rubbed bronze, stainless steel, nickel and brass finish choices when it comes time to select door and cabinet hardware.  But we are here to tell you that you can add color to your hardware.

Adding a specific color will not only add interest but it can offer other positive influences. For example, hospitality designers will appreciate the ability to incorporate a client's specific brand color to a project's hardware, thereby highlighting the brand.  If the hardware selection incorporates design features such as floral motifs, animals, bugs etc., adding color will allow these patterns to really "pop".  Our lizard pull shown below is a fine example of the impact color can have on custom hardware.

A subtle introduction of color can also have a big impact.  The effect is seen in the color we added to our Morphic cylindrical entryway pulls and debuted at this year's HD Expo in Las Vegas.  The cutout design offers the perfect opportunity to add color to this sleek and contemporary collection of custom hardware.

Is there a place in your next project for some color?  If so, please visit our site at www.martinpierce.com to view our entire collection of architectural hardware.

Our vacation to Spain continues

The next stop on our visit to Barcelona was to see CASA BATLLO.  This iconic Modernist masterpiece is located in the center of Barcelona on the historically prestigious street Passeig de GraciaI.   It was originally commissioned by Lluís Sala Sánchez but totally renovated by the Batllo family from 1904 -1906. It is known locally as the House of Bones, no doubt because so much of its form is inspired by the vertebra of both man and other animals. Can you see the reference to vertebra in the design of the staircase?

The house, like so much of Gaudi’s work, incorporates fantastical earthly and non-earthly themes.  For example, the ocean with its waves, sea creatures and sea shells carved on the doors, are captured in tile.

As you can see, Gaudi’s Casa Battlo makes wonderful use of colored tile, in particular the color blue.  A fine example of this is the inner shaft that was used to cool the house with louvered wooden shutters that opened to allow cool air in.

The curvaceous and fluid shape of the wooden windows and doors is reminiscent of tree roots and plant tendrils.  Be sure to take notice of the unique wainscoting design on the walls.

And the arched roof crowns of the building are, by all accounts, Gaudi’s interpretation of a dragon.

Get to know your entry door hardware up close and personal---backplates

A front door is something we all have in common.  And while the appearance of our entry door hardware varies from building to building, they all have parts in common.  Let's break it down and review the proper terminology and purpose of this very necessary hardware.

Back plate or to some, escutcheon: The plate to which a door handle, be it a lever or knob, is attached, making it possible to open the door. The back plate was often referred to in England and Europe as an escutcheon plate which tends to imply that it is more decorative.  The back plate not only is the mounting for the handle but it also covers up the "guts" of the lock in the door be it a tubular lock or mortise lock.

At Martin Pierce  our back plates are extremely decorative and very stylized.  They are designed to continue the artistic style of the handles.  With our lizard handles shown in the photo we designed a back plate to look like the bark of a tree; our Willow knob uses a circular back plate or rose in the form of overlapping willow leaves; the Hedgerow handle uses a back plate that has fretted sections at the top and bottom that are stylized tree branches.

Our entire collection of custom architectural hardware for both entry and interior doors can be seen at www.martinpierce.com.

The cool beauty of stainless steel hardware

We spend a lot of time talking about and sharing our collection of bronze hardware, and for good reason.  This warm metal is very popular because it works with almost any design style and is certain to please both your hospitality and residential clients.  While bronze is popular, stainless steel fixtures can have the same impact on projects, especially those done in a contemporary style. We offer several stainless steel collections but, of course, custom hardware can be cast in the metal of your choice.

Sleek and modern

Our Ergo collection is not only sleek and modern but ergonomically designed to fit the hand comfortably, making it a perfect choice for hospitality and commercial projects.  The unique design is also ADA compliant.

Texture and color

The architectural hardware pieces in our Morphic collection have a textural quality that is both beautiful and interesting.  A powder coated accent color is an option we debuted at the 2014 HD Expo, giving designers the ability to further customize the pieces for their clients.

Organic

A combination of modern and textural, our appropriately named Texture collection offers a little of both.  The contemporary wave pulls are suitable for both residential and commercial projects, and while the chiseled collection is not cast in stainless as are the other items we have shown, it will add a bit of rustic elegance to any door, drawer or cabinet.

Bronze, brass, stainless or your own custom combination of metals---your choice of metal finishes for hardware can add a personalized detail to your next hospitality, residential or commercial project.

You can view our entire collection of stainless steel and other custom hardware items at www.martinpierce.com.

Anatomy of a bronze door handle-part 3

Whew!  I am tired just reading about this lengthy process.  But excited about the outcome! Onward... now that we have “lost” the wax that melted out we are left with a hollow shell with the ceramic gates or funnels.  Try to envision a hollow wall around the body of the bird that we are now going to fill with molten bronze.

We will pour the molten bronze into  the shells and, once cooled, we are left with castings. The gates will have been turned to bronze and will need to be removed.  In the photo you can see the flat areas on the body and feet that are a result of the gates being removed.

These areas are ground off leaving behind a scar or rough section that will require further grinding to smooth them out.  The details such as the vein of a wing will have to be "chased" or added by hand.

In the next photo we show the top side of the casting before the piece has been assembled.

This beautiful representation of the magnificent jay hawk can be modified for use as entry door handles or hung on the wall and enjoyed as a wall sculpture.

To view our collection of architectural hardware, sculptures and custom furniture, visit our site at www.martinpierce.com.

Anatomy of a bronze door handle--Part 2

Sketch is done and details as to how the sculpture will be attached to a door, how to design it so that it can be cast to allow wax and metal to properly flow through the mold and not weigh a ton, it is time to move on to the next step. (you can review the first steps here). To make the mold for the body a pliant silicon membrane over the outside of the body and the legs has to be built-up.  At this stage you are also “gating” the mold by adding square rod sections to the body of the bird. The silicon will from a membrane around these rods and when these rods are later removed what is left is a hollow or void  through which the hot wax is poured . The mold is strengthened by being housed in a rigid metal case that keeps it true to form. Once the mold is complete it is literally cut down the middle and opened up to remove the rods and the result is a hollow replica of the birds body with funnels that have been created through which wax and later bronze can flow.

The next step is to pour  molten wax into the hollow mold through the gates and slosh it around, coating the inside of the mold with liquid wax.  When the wax is dry, the mold is carefully opened and the wax body is removed with the  gates or protrusions attached.

We now have a one piece wax bird replica that is hollow inside and we need to turn it into a bronze piece that is hollow.

We cut around the birds legs and around a bit  of his stomach to create a hole in the cavity of the wax body; we are going to cast the feet, stomach and wings as separate pieces. What we are left with is 4 parts of our bird, all in wax.  Each wax piece is dipped in a clay like substance similar to the way we created the rubber mold, building up a clay slurry over each part of the bird to create a plaster like “shell” for each piece.  When dry this slurry becomes rigid and forms a casing. With the bird body we will pour the slurry inside the hollow wax body and also coat the outside of the body so that, when fired,  both the inside and outside will become a hollow ,walled shell.  These "shelled" pieces are then baked in a kiln that will make them very rigid and strong.  The heat causes the soft wax to melt out and collect at the bottom of the kiln, hence the expression "lost wax".  Actually, not really lost but rather recycled.  Even artists in ancient times recognized the value of re-using and recycling products.

All of these steps will result in a beautiful piece of functional art that can be used as a door pull to create an extraordinary entrance to a business or home, or enjoyed as wall art.  This will become evident in our final post on the sculpting and casting process for this particular piece of architectural hardware.

You can view our entire collection of custom hardware at www.martinpierce.com.

Anatomy of a bronze door handle

We introduced the beginnings of our jay sculpture with a post back in August of 2014. After working on the piece we decided to offer it as a limited edition of 25 sculpture that can be hung on the wall or fitted for use as door pulls.  As with any bespoke item, the creative process involves many steps. As we have shared many times, all sculptures and our custom door hardware pieces begin with a detailed sketch of Martin's vision for the piece or, in this instance, many photographs of his inspiration i.e. the red tailed hawk we see flying above the skies of Los Angeles.

Red tailed Hawk Martin Pierce Hardware

martin pierce redtail hawk on utility pole

As mentioned, when Martin began the jay sculpture in wood it was always his intention to use this sculpture as a pattern to make bronze door handles.   Therefore, when designing the bird there were three very important considerations:

The first consideration was a) how would you, as a home or business owner,  be able to grip a section of the bird to pull open your door and b) how would you be able to mount the bird on your door?

These considerations affected the way Martin designed the wings.  The left wing has a flatter area which can be used to attach the bird to the door and the right wing is the area that would make it possible to grip and hold to open the door. The tail of the bird could also be used as a secondary spot to attach the bird to the door if necessary.

The second consideration was the casting process. In casting you have to think about ways that the molds can be made so that  first the wax,  and then  later the bronze, can flow easily. To do this you have to plan where you are going to create “gates” or funnels or paths for the wax and bronze to evenly flow.

The third consideration is weight.  In order to avoid having the "bird" weigh a ton, so to speak, the casting of the body must be hollow.

Once all these details were ironed out it was time to begin sculpting the mold.  Details to follow on that very interesting process as well as casting, pouring etc.  So stay tuned!

To view our entire collection of custom architectural hardware you can visit our site at www.martinpierce.com.

Bigger is sometimes better with our newly sized cabinet pull

If you checked out our Latest News Section on the website then you already know that we are now offering a new edition to our Ergo collection---the 6" wide Wave pull. Those designers who are familiar with this line are already aware of the 2" and 3" pull but there has been a real need for a bigger pieces that are scaled for larger cabinet doors and drawers. I recently had the pleasure of working on a project in New York where we were being specified for many of our Ergo and Morphic pieces but the cabinet drawers simply cried out for a more robust, yet still elegant, Ergo wave. We considered a few possible sizes but decided on a 6”W x 1 1/2”D x 1”H.  Scaling a piece is not an easy task which may explain why it has taken us so long to bring out this piece but we think the wait has been worthwhile.  Designers and architects can now specify this piece that is being cast in either bronze or stainless steel, offering a good color range to suit their clients specific needs.

We have had a lot of fun photographing all the wave pieces that went into this upscale and delightful kitchen project and credit needs to be given to our wonderful photographer Doug Hill for having the imagination to arrange and photograph these pieces to show off their fluid and organic quality.

We would love to hear your comments on this new addition to our Ergo collection or, to view our entire collection of architectural hardware please visit our site at www.martinpierce.com.

A feast for the eyes:

Martin Pierce has gone to the birds with our new sculpture

We recently teased you a bit with an introduction to a project Martin is working on that involves the design of a blue jay.

To catch up you can view that introductory post here.

We are very happy to say that the jay wing carvings have now made it into wax, shown as the brown wing in the photo below. The wax wing was created by pouring wax into a rubber mold that we made around the grey pattern (carvings) that Martin sculpted. The pattern or carving in the photo above is beige in color, the natural color of basswood, but we then "paint" the pattern with a grey primer to fill in the grains and pores of the wood, giving us a smooth grey pattern and one without the distraction of wood grain. If we didn't fill in the grain the end result would be a bronze casting with a visible and distracting wood grain.

As with all of our pieces, we will use  the lost wax method when creating the eventual bronze castings as this method allows us to capture the intricate details of the wings and bird.

This particular sculpture was not commissioned.  Rather, it is just a bird we see often and one that Martin really likes as they have a lot of character and are fun to watch.  We had originally thought of just having the wings as door pulls but decided to turn it into a complete sculpture that can be used as wall art, yet still offer the option of mounting it on the door as a pull.  We are also happy to announce that it will be available in a limited edition of 25 and we will keep you posted on the progress with future posts.

If you are interested in other architectural hardware pieces modeled after birds or would like to discuss a custom order for your next hospitality or residential project, please contact us or visit our site at www.martinpierce.com.

A new home for our iguana pull

It is always a thrill for us to see our pieces in place in their new home.  Such was the case when we received this photo of both our Iguana and Hawaiian Bird pulls in use on a custom armoire. When we were contacted by Debbie Zylstra of Zylstra Interiors (in Kona Hawaii at the time but has since relocated her business to South Carolina) the challenge was to design a custom pull that was reflective of the native culture and tropical surroundings.  We chose to create a pull in the likeness of the whimsical Laysan Finch for the lower section of the built-ins.

Our Iguana pulls would be used to open the double doors in the upper portion.  Below is a rendering of Martin's showing how he envisioned the pulls in use

and here is an actual picture of the completed project.

The Hawaiian bird pulls are used on the drawers and lower doors.  The polished bronze finish is the perfect compliment to the amazingly beautiful Koa wood that is accented with an ebony filet.

If you  have a residential or hospitality project that would be made more beautiful through the use of custom hardware or you would like to view our entire collection, please visit our site at www.martinpierce.com.

How Iris enjoys the dog days of summer

August is one of those interesting months in which summertime activities come to a screeching halt yet work activities have not picked up the pace.  I think people must be hesitant to let summer go so, even though school is back in session in many areas and lazy days are over, we just can't seem to get in the mood to go back to work. Iris, our pit bull, certainly agrees with the idea of enjoying one final month of summer.  Although, if truth be told her days are really the same all year round--eat, sleep, play, rinse and repeat.  Oh to be able to enjoy the dog days of summer for just a few more weeks!

Here is Iris barely able to keep her eyes open while she naps in the warm southern California sun.

As you can see, her days never really change as here is Iris trying to stay awake in August of 2013!

One of her favorite past times is to play with her boyfriend Hoyt the corgi.  She is looking longingly for  him from the front steps of the warehouse, their favorite spot to meet.

And, finally, Iris whiling away a sunny afternoon.

Martin is making progress on the bust of Iris that he has been working on.  He decided to carve it out of walnut and it should be beautiful.  I will share details as the work progresses.

In the meantime, if you would like to view our entire collection of custom hardware, please visit our website at www.martinpierce.com.

Part 5--a step by step process of creating custom door hardware

For those of you who have been following along with this process, you will remember that we had reached the shelling stage in part 4 where the waxes had been encased in silicon shell and were ready to move on to receive the molten bronze. The goblets were the first part of the handle to be cast and, thankfully, we only needed to make one pattern that, with just a few minor adjustments,  would work well for both the left and right facing figures.

We then moved onto the 2 figures.  Having made 2 molds, one for each figure, we made wax replicas which we proceeded to shell.  The biggest challenge with the figures was how to devise a way to mount them to the cast goblet.  As they were separate castings we decided to attach the figure by drilling through the goblet into the hand of the figure so that we could thread and weld a small bolt to hold the figure firmly in place.  As we discussed in part 3,  the back of the goblet was cast separately and the reason for doing so was so we would have good access to the figure from inside the goblet.

The castings were then prepared for assembly as pairs to be mounted back to back onto glass doors. The client wanted to use 2 pairs as he had double glass doors in his wine cellar.

For strength we decided on 2 mounting posts for each handle, one to support the top portion of the goblet with a post attached to the goblet and the other post attached to the figure at hip level.  If you look at the photograph of green wax figures you will see the mounting post.

Once cast the solid bronze posts are drilled and tapped and we create a 3/8” diameter bolt that is threaded at one end and blank at the other. As these were being mounted back to back, the threaded end was screwed securely into one post and the non- threaded end was passed through the door into the post of the other handle.  The figure was then held in place by drilling a hole through the wall of the post into the bolt and inserting a threaded Allen screw.

As you can see from the almost finished product, these doors are going to create a spectacular entrance to the client's personal wine cellar.

To view our entire collection of custom door hardware, please visit our site at www.martinpierce.com.

What is all the custom hardware buzz about?

We recently received this letter from the Greenfield Second Church in Greenfiled, MA regarding their annual Beefest:

Hello Martin Pierce Staff:  Your nature-themed products are stunning. I am boldly writing to inquire about a donation of bee or butterfly item for our Community Bee Fest raffle to be held June 7, 2014.

WHY would you want to do this? We are losing millions of bees each year to colony collapse disorder which greatly impacts the farmers’ ability to grow fruits and vegetables. Our community Bee Fest, now it its 4th year, is an attempt at public education with a real purpose. Rev. Lorenzo L. Langstroth was pastor of our church in Greenfield, MA, in the 1840’s. He created the “Langstroth moveable frame beehive” still used by 80% beekeepers in the world. We honor his contributions by holding an annual “Bee Fest” with bee education, children’s crafts and a Pollinator Parade and by lifting up the serious challenges bees are facing worldwide. Bee researchers from the University of Massachusetts will give short talks on their research for adults which includes both interested local residents and New England beekeepers.

To give back to our community, our church is organizing 5 raffle baskets of donated bee-themed products. Proceeds from the raffle, after expenses, benefit SNAP (food stamps) and Heifer Prject Int’l (to purchase honeybees for families in 3rd world countries).

If you are willing to donate either a dummy bumblebee door knob or butterfly pull, we would be so grateful. If you are interested, please add product brochures for guests to order directly from you-I am sure they would be as delighted as I am to find your company!  This event is growing in scope and numbers and we expect about 450-500 attendees this year. www.greenfieldsecondchurch.com]

We appreciate your kind consideration.

This interesting fundraiser is dedicated to something near and dear to Martin's heart----the humble Bee.  We also liked the fact that some of the raffle proceeds go to the Heifer Project International to help purchase honeybees in 3rd world countries; and more generally that this Bee Fest helps raise awareness about the challenges bees are facing.

Bees have always been important in Martin’s art work as seen in his first bee sculpture of a bee landing on an orchid.

We are both fans of bees, even after being stung.   Iris, however, who was recently stung, does not share our viewpoint but, then again, name me a pitbull that does!  One of our favorite bees is the black carpenter bee which we first encountered back in 1978 when we were on a camping vacation in Santorini Greece. It is this bee that was the inspiration for the bumble bee handle from our Netzuke collection that we donated.

Carpenter bees are large bees that are distributed worldwide. There are some 500 species of carpenter bee in 31 subgenera.  Their name comes from the fact that nearly all species build their nests in burrows in dead wood, bamboo, or structural timbers. Wikipedia

To view our entire Netzuke collection and other custom hardware, please visit our site at www.martinpierce.com.

Colorful powder coated hardware

We discussed our efforts to produce a durable and colorful new addition to our Morphic collection in a previous post through the use of powder coatings.  We are now pleased to share with you the newest offering in custom hardware from Martin Pierce:

In response to designers requests for a bolder statement in architectural hardware, we have designed this version of our Morphic pull with an impressive 32" height and an easy to grasp 2" diameter; the 316 stainless steel offers a rust resistant and durable finish.  This pull can now be further customized with a powder coated accent  in your choice of color. We are showing it in hot orange but we are able to work with designers to use a custom color or, for the hospitality market, perhaps a color associated with a client's specific brand to further enhance their corporate image.

This new piece, along with many of our customers favorites (and maybe a surprise or two) can be seen in our booth #4659 at the 2014 HD Expo in Las Vegas Nevada beginning May 14th and running through May 16th at the Mandalay Bay Hotel.  We look forward to seeing you there and hearing your comments on this new and colorful powder coated door pull.

To view our entire collection of custom hardware, please visit our site at www.martinpierce.com.

Great news for hospitality designers attending HD Expo 2014

As with all of the exhibitors, we are very busy preparing for and excited about attending the HD Expo in Las Vegas again this year and sharing many of our favorite products, as well as debuting several new items.

We hope to share with you the prototype for our new LED lit entryway lever that we feel could be one of the most exciting innovations in hospitality design.  This hardware is not only beautiful but provides safety and function for all of your hotel, retirement home, spa and boutique hotel clients.

We will also be debuting our new powder coated line from our Morphic custom hardware series.  This new addition will allow you to further customize your client's spaces with a color that is either part of the overall design plan or represents and highlights their specific brand.

And, while we have been sharing the fact that we will be giving away ten of our dragonfly or scarab beetle drawer pulls, we have decided to double that and give away 20 of these unique pieces of hardware to the first twenty visitors to our booth #4659.  So be sure and stop by early, see our products, say hello and collect your custom bronze drawer pull.

You can view our entire collection of architectural hardware on our site at www.martinpierce.com.

Martin Pierce invites you to join us at the HD Expo 2014

Our invitation that recently appeared in the HD Expo newsletter:

Martin Pierce would like to invite you to come join us at HD Expo 2014.

Click here to register for free.

COME SEE OUR NEW DOOR HANDLES BOOTH 4659

This year we will be introducing our latest Morphic door handles in 316 stainless steel and bronze and will be offering you the choice of custom powder coated colors. We will also be debuting our first prototype LED handle, geared to those in the luxury hospitality market, we expect this illuminated design will become a signature statement. As a company we offer a full range of door hardware that includes trim for electronic key cards, bathroom and cabinet accessories and styles suited to all genre of boutique hotels be they contemporary, classical or transitional.

Booth: 4659 Contact: Anne Pierce, CEO Email: anne@martinpierce.com Phone: (323) 939-5929 Website: http://www.martinpierce.com

The first 20 visitors to our booth will receive a bronze cabinet pull!

Add color to your hardware with a powder coated finish

 

We will be debuting several new pieces at the upcoming 2014 HD Expo and one that we are particularly excited about is the new powder coated interior of our Morphic cylindrical pull. We have chosen the vibrant hot orange color shown above from Prismatic Powders but, as with all of our architectural hardware products, your choice of color can be customized to meet your needs.

Powder coating is an extremely durable way of adding an accent color to hardware, specifically the pieces in our Morphic series where the colored, powder coated finish will be visible through the openings in the design.

As its name suggest, powder coating is achieved by shooting powder onto a metal surface that has been specially prepared to receive the powder.   The process involves masking off the areas you want to be free of color and then baking on the applied color at a fairly high temperature.  This is a common finish for patio furniture as well as for hot rod motorbikes. The biggest design advantage is that it allows you to add your brand stamp to our products i.e. a commercial setting that has a brand color, thereby reinforcing the client's brand.

As a company we offer a full range of architectural door hardware that includes trim for electronic key cards, bathroom and cabinet accessories and styles suited to all genre of  boutique hotels be they contemporary, classic or transitional.  To see our new powder coated hardware as well as a sampling of our custom hardware, stop by our booth #4659 at the HD Expo or visit our site at www.martinpierce.com.