animal door knobs

Mixing it up with Bee Door Knobs and their Lizard Friends

The nature inspired Netsuke door handle collection was not conceived as an interchangeable series, but thankfully creative interior designers have conjured up imaginative ways to use these as combination door handle sets. Case in point is a recent project where the bee door knob was paired with the lizard door knob to create a whimsical statement. The sets were specified in polished bronze to create a stunning jewel like set for a custom makeover of the master bedroom and bathroom. The bathroom privacy set used a simple push-pin latch on the honey comb side with a discreet emergency release on the bark rose side of the door (exterior).

Our door handle knob sets are connected with a square 8mm spindle that is attached to each knob with a set screw or Allen screw. As we use the same type of spindle for all our door knobs most of the knobs are interchangeable. Since other door hardware manufactures use different spindles and methods of attachment our knobs may not be suited as half sets with knobs supplied by others.

The Netsuke collection comprises 4 interchangeable animal knobs including a rabbit, frog, bee and lizard making them popular choices for children’s bedrooms. While whimsical in nature, these animal knobs are finely detailed and cast in solid bronze with each knob using a lb. of molten bronze.

As a transitional set that bridges the classical with whimsical you may want to consider the Hedgerow and Willow knob on the more public exterior side of your door with a Netsuke knob on the more private interior side.

Gecko Cabinet Pulls

We have just completed an order for Gecko cabinet pulls in interesting and contrasting finishes.

The bright gecko is an example of brushed natural bronze, a finish created by buffing the gecko on a buffing wheel. The dark gecko is also buffed but to a lower luster and then dipped in a solution of M20 to create an overall black appearance.

The gecko is one of 2 lizard cabinet knobs and forms part of a compete series of lizard door hardware that includes entry door sets and interior door handles.

These 2 pieces serve as a good visual approximation for the industry finishes US4 (satin bronze) and US10B (dark satin bronze) which is described below.

Patina by Conversion Coating

Using M20 by Birchwood Technologies we make a solution using 1-part M20 and 1-part distilled water mixed in a non-reactive dipping vessel. The piece is immersed for 30 to 60 seconds and then neutralized by immersion into another vessel of distilled water.  If upon inspection we see that certain areas have not reacted to the solution and are still bright we re-clean those areas and dip again.

Highlighting

The chemical conversion creates a uniform patina so to accentuate the gecko’s markings we gently burnish selected areas by hand with a fine nylon abrasive pad and thereby re-expose the golden tones of the bronze casting.

Sealing

To seal the bronze, we use a soft cloth to apply 2 coats of oil and once dry finish with hard wax. There are many products to choose from we have found Sculpt Nouveau’s metal oil and black wax easy to work with.