Iris has a new friend- Part 4 and final reveal

Whew!  As you can tell from the previous posts, this is a time consuming project that requires quite a bit of detail to get it just right. When we last left you Martin had begun the process of carving the details of Iris' ears, head etc. and we shared the tools that he uses to create these details.

The next step is perhaps the most important, capturing the very essence of Iris in the uniqueness of her facial expressions, beauty marks etc.  As with all dogs, the brow is where we see a lot of their comical and quizzical expressions and Iris has quite lovely frown lines. Martin  began carving these with a fine gauge to create a deep furrow.  He then employed a “V” chisel to create acute sides to the frown furrow and, lastly, he used a reverse gouge to soften the tops of the frown lines.

Next came the pores where her whiskers were created with a fine veiner that was used to make shallow but well defined indentations. That left her beauty moles.  If you look closely you can see one of these moles just behind her "smile".  Martin approached these as if he were making a miniature “sand castle” i.e. the surrounding wood is scooped out leaving a raised mound.

Sanding the entire piece was the next step.  Martin began with an orbital sander using 120 grit paper and then sanding by hand with 120 and finer 150 grit paper.  Finally, he used medium and fine scotchbrite sheets to give her a really smooth appearance.

The bust was finished with oil and clear wax and no lacquer. The oil, especially, is responsible for bringing out the differences in grain color and in making the figuring of the walnut even more beautiful.

Over time and with exposure to the sun this bust will become a gorgeous golden brown and will look very close to Iris' actual color. We are probably going to cast this in bronze and, if so, will offer it in a limited edition.  Our only reservation is that we both like the effect in wood and want it to stay at home as we are all (including Iris who thinks it is a friend) enjoying it so much.

It all began with this photo:

And ended with this beautiful hand-carved sculpture:

What do you think?  Did we capture her?

If you would like to view our entire collection of architectural and custom hardware, visit our site at www.martinpierce.com.

Iris has a new friend-part 3 rough carving

The next step in this journey of the heart is the rough carving.  You can bring yourself up to date and review steps 1 and 2 by clicking here. Martin will typically draw bold lines on the surface of the wood he is carving to map out where to remove wood to create the desired shape and depth.  He gathers his carving tools together which includes a mallet and 2 scooped chisels, as well as a pencil.  You can see these tools in the photo below.

Carving is a reductive technique where you start with large, wide and deep gouging chisels to quickly  remove wood and then move to the smaller flat chisels.  The mallet is used to add power to the chisel.  Martin also uses the thick area of flesh on his palms to hit the chisel as you can achieve greater control in any tricky areas with this method.  The wood we chose for this sculpture, walnut, is a hard, dense wood so it takes a lot of force to  carve it.

Martin began this stage of carving by focusing on the ears.  He removed wood from underneath the ear to capture the delicacy and expressive quality of Iris’s ears.  This was tricky but he used fine veining chisels to create crevices and a small spoon gouge chisel to hollow out the ears.

In the final installment of this series we we will share with you how the defining details were created to capture the true essence of Iris' personality and debut the finished product.

To view our collection of architectural hardware and custom furniture, please visit our site at www.martinpierce.com

How Iris enjoys the dog days of summer

August is one of those interesting months in which summertime activities come to a screeching halt yet work activities have not picked up the pace.  I think people must be hesitant to let summer go so, even though school is back in session in many areas and lazy days are over, we just can't seem to get in the mood to go back to work. Iris, our pit bull, certainly agrees with the idea of enjoying one final month of summer.  Although, if truth be told her days are really the same all year round--eat, sleep, play, rinse and repeat.  Oh to be able to enjoy the dog days of summer for just a few more weeks!

Here is Iris barely able to keep her eyes open while she naps in the warm southern California sun.

As you can see, her days never really change as here is Iris trying to stay awake in August of 2013!

One of her favorite past times is to play with her boyfriend Hoyt the corgi.  She is looking longingly for  him from the front steps of the warehouse, their favorite spot to meet.

And, finally, Iris whiling away a sunny afternoon.

Martin is making progress on the bust of Iris that he has been working on.  He decided to carve it out of walnut and it should be beautiful.  I will share details as the work progresses.

In the meantime, if you would like to view our entire collection of custom hardware, please visit our website at www.martinpierce.com.

Gone to the dogs!

The past couple of weeks have found us taking a respite from the mountains of work and sharing with you photos and recaps of some of our "lazy, hazy, crazy days of summer". But, sadly, it is time to get back to work.  Before that we wanted to share with you another fun project: We recently celebrated a birthday (but I will not say which birthday as we do value our friendship) with our very dear friend Tracy.  As our gift to her Martin carved a sculpture of her dog Dale, who is a 3 legged wonder and her loving companion.  The gift  was a very pleasant surprise for her and one that I know she cherishes.

If you knew Dale you would understand what a spunky and funny and loving dog he is.  And while he may be a tad challenged by having 3 legs he is an extremely agile canine and could give us two-legged humans a run for our money any day. Dale was started from one large block of wood although Martin did have to add a separate piece for the tail for, if it had it been from the same block the end grain would have made this section too fragile. The wood he chose was Alder as it is a reasonable wood to carve and it has little grain allowing Martin to paint on Dale's coloring.

As we mentioned in an earlier post, Martin is thinking about sculpting our dog Iris.  Iris' sculpture will focus only on her head.  But just to be clear, there is nothing wrong with her body (unlike her human companions, Martin and I) as she has beautifully defined muscles and a generally athletic physique.  To begin the process Martin studies photographs that will become drawings that are then properly scaled so that they can be traced onto a block of wood.

We were wondering if any of our readers have any suggestions for a suitable wood.  We are thinking of walnut, which carves beautifully but the dark brown color will fade to a golden color over time.  Or perhaps white oak that, despite its name, is light brown in tone. We hope you enjoy our sculptures.  As you may be aware, the process of creating a sculpture and a bespoke piece of architectural hardware is quite similar.  To view our entire collection of custom hardware please visit our site at www.martinpierce.com.